The Working Principle And Maintenance Method Of The Conveyor Matching Equipment Are Introduced
The working principle and maintenance method of the Conveyor Matching Equipment are introduced
Conveyor Matching Equipment and conveyor belt, which is used in belt Conveyor Matching Equipment of carrying and transporting materials, rubber and fiber, metal composite products or plastic and fabric composite products. Belt conveyor in the agricultural, industrial and mining enterprises, and transportation is widely used for conveying of various solid block and powder materials or items, Conveyor Matching Equipment can be continuous, high efficiency, the transport of large dip Angle, Conveyor Matching Equipment safety operation, the Conveyor Matching Equipment used is simple, easy maintenance, low freight, and can reduce the engineering cost, shorten the transportation distance, economically. Today, we will introduce the maintenance method of the supporting equipment for the conveyor:
Conveyor Matching Equipment
Conveyor Matching Equipment with simple structure, convenient operation advantages are widely used in cement, coking, metallurgy, chemical industry, iron and steel industry in the transmission distance is shorter, the throughput of the smaller places. In industrial production, it is crucial to save production cost, so it is necessary to maintain the proper equipment of the conveyor, so as to prolong the service life of the supporting equipment of the conveyor. Now let's take a look at how to maintain the supporting equipment of the conveyor.
1, Conveyor Matching Equipment in the transport and storage, should be kept clean to avoid direct sunlight or rain and snow dip tube, prevent and acid, alkali, oil, organic solvent such as contact material, heating device and distance one meter away.
2, Conveyor Matching Equipment storage warehouse temperature should be between 18 to 40 ℃, relative humidity should be kept between 50-80%.
During the storage period of the conveyer equipment, the product shall be placed in a roll, and shall not be folded, and shall be turned into the auxiliary equipment of the conveyer every season.
4. The conveyor supporting equipment of different types and specifications shall not be used together. It is better to use the glue joint method.
5. The type, structure, specification and level of the supporting equipment of the conveyor shall be selected reasonably according to the conditions of use.
6. The running speed of the supporting equipment of the conveyor is generally not greater than 2.5m/s. The material with large block degree and large abrasive material and the unloading device using fixed pears should be used as low as possible.
7, roller conveyor drive roller Conveyor Matching Equipment and the diameter of the relationship between layers, drive roller, redirection roller supporting and requirement for roller groove Angle should be according to the regulations of the design of the conveyor, reasonable selection.
8. The feeding direction should be in the direction of the supporting equipment of the conveyor, so as to reduce the impact of the supporting equipment of the conveyor when the material is falling, it should take a chute to reduce the falling distance of the material. Conveyor Matching Equipment by material paragraph should shorten the roller, buffer roller spacing and used for the material leakage, Conveyor Matching Equipment conforms to use soft moderate keep-off board, in order to avoid gear plate quality, scraping the broken belt surface of Conveyor Matching Equipment.