Home > News > Content

Rubber Track Used When The Phenomenon Of Cross-cutting Reasons

Rubber Track used when the phenomenon of cross-cutting reasons

In the case of normal use of Rubber Track, there are more such phenomena. The reasons for the above are generally divided into:

First, the phenomenon of continuous cross-cutting, the first stop check, to be carefully checked, it is clear that this phenomenon.

Second, the conveyor may have individual protruding roller groove angle, resulting in rubber crawler on the lines appear broken, making the result of the cross.

The company's bonding method is the use of hot plastic way, paste the core plastic arranged in the middle, the stage is only a layer of cloth, rubber crawler operation direction and joint direction to take the same.

Third, the active electric drum, tension electric drum and driven electric drum above the cover of some unusual adhesive, making the Rubber Track above the size of the pimple are covered, so it is easy to make a full range of rubber crawler, to avoid such The occurrence of the phenomenon will often regularly clean the Rubber Track of foreign matter.

Rubber Track with a good elasticity, high strength, impact resistance, good flex resistance, into a good slot, the use of elongation is small, suitable for long-distance, high load, high-speed conditions, the advantages of conveying materials. Rubber Track is widely used in coal, mining, port, metallurgy, power, chemical and other fields of transportation materials.

It is more efficient and more economical than the mechanical joint. It should be able to have better joint effect, but from the practice point of view, because of the use of cold adhesive adhesive method, Process conditions are more difficult to grasp, and the quality of the adhesive on the joint effect is very large, so it is not very stable. The following are the same as the "

Hot vulcanization joint method: Practice has proved that this is the best of a joint method, to ensure high joint efficiency, but also very stable, joint life is also very long, easy to grasp. But there are processes such as trouble, high cost, short joint time and other shortcomings.

Rubber crawler in use should pay attention to the issues include:

1. To avoid the roller is covered by the material, resulting in rotation is not working to prevent leakage of material in the roller and tape between the attention of the Rubber Track part of the lubrication, but not oil Rubber Track;

2. to prevent rubber crawler load start;

3. Rubber Track deviation, should take timely measures to correct;

4. found that rubber crawler local damage, the application of artificial cotton timely repair, so as not to expand;

5. To avoid the Rubber Track by the rack, pillar or block material block, to prevent the break tear.