Home > News > Content

How Can The Flat Transmission Belt Be Stored?


In the storage and use of Flat Transmission Belt, if not properly, will shorten the life of the Flat Transmission Belt, even worse will lead to Flat Transmission Belt damage, can not be used normally. The following should be noted when storing and using Flat Transmission Belt:
1, Flat Transmission Belt in the transport and storage, should be kept clean, to avoid direct sunlight, rain and snow leaching, to prevent acid, alkali, oil, organic solvents and other rubber material impact of material contact, and from the heating device 1 meter away.
2, the storage room temperature should be maintained at -15 ℃ - +40 ℃ between the relative humidity should be maintained at between 50-80%.
3, the storage of Flat Transmission Belt to be placed in volume, shall not be folded, placed during the quarter should be turned once.
4, Flat Transmission Belt operating speed should not be greater than 5.0 m / s, transport block large, wear large materials and the use of fixed plow unloading device should try to use low speed. Exceeding the specified speed will affect the tape life.
5, the conveyor drive drum diameter and Flat Transmission Belt with the relationship between the drive roller and reducer to the roller and the requirements of the roller groove angle should be based on the conveyor design requirements, a reasonable choice.
6, in order to reduce the impact of material on the tape and wear, feeding direction should be along the direction of running the tape; material falling into the tape sand nest should be reduced as far as possible; feeding port should avoid the roller or roller is just above ; Tape by the material should be shortened roller spacing and take buffer measures.
The heat-resistant Flat Transmission Belt is designed for conveying material not higher than 800 ℃. The temperature of the belt is not more than 220 ℃ when the high temperature material is transported. The heat-resistant and high-temperature Flat Transmission Belt is divided into ordinary heat-resistant and high-temperature Flat Transmission Belt and strong heat-resistant and high temperature Flat Transmission Belt Two, mainly based on the Flat Transmission Belt with a strong band to distinguish. Heat-resistant and high-temperature Flat Transmission Belt life is affected by many factors, its storage conditions, the use of maintenance measures have affected its life.
Heat-resistant Flat Transmission Belt should be stored in the following guidelines:
1, storage warehouse temperature, humidity should be suitable, the general requirements of the temperature between 18 ~ 40 ℃, relative humidity between 50 to 80.
2, heat-resistant high-temperature Flat Transmission Belt storage should be stored in volume, can not be folded storage, storage should be regularly during the season flip.
3, the warehouse storage to avoid direct sunlight, to avoid contact with acid and alkali, organic solvents and other substances, from the power generation device a certain distance, because the power generation device will produce ozone, will produce corrosion on the Flat Transmission Belt, heat and high temperature Flat Transmission Belt aging The
Routine maintenance should also be carried out, mainly on the heat-resistant high-temperature Flat Transmission Belt with the daily belt cleaning, regular inspection conveyor, Flat Transmission Belt operation, transportation according to the nature of the material to adjust the Flat Transmission Belt speed and so on.
Acid and alkali Flat Transmission Belt in the transport and storage, should be prevented with acid, alkali, oil, organic solvents and other substances in contact, keep clean to avoid direct sunlight or rain and snow leaching, and from the heating device one meter away. During storage, the Flat Transmission Belt shall be placed in rolls and shall not be folded, and shall be flipped once every quarter during storage. The storage temperature should be kept between 18-40 ℃ and the relative humidity should be kept between 50 and 80%.
Here in the way for everyone to talk about acid and alkali Flat Transmission Belt characteristics and advantages:
Acid-resistant Flat Transmission Belt with cotton canvas, nylon canvas or polyester canvas for the core, with a good body elasticity, into the groove performance is good, the use of elongation is small. Selection of acid and alkali materials made of plastic cover, with good resistance to chemical corrosion and good physical properties, suitable for contact with the acid and alkali working environment, such as phosphate fertilizer, sea salt.