Home > News > Content

Flat Transmission Belt Maintenance Method

Flat Transmission Belt maintenance method
 1, Flat Transmission Belt in the transport and storage, should be kept clean, to avoid direct sunlight, rain and snow leaching, to prevent acid, alkali, oil, organic solvents and other substances affecting the quality of rubber contact, and from the heating device 1 meter away.
2, the storage temperature should be kept in the warehouse at -15 ℃ - +40 ℃ between the relative humidity should be maintained at between 50-80%.
3, the storage of Flat Transmission Belts to be placed in volume, shall not be folded, placed during the quarter should be turned once.
4, Flat Transmission Belt operating speed should not be greater than 5.0 m / s, transport block large, wear large materials and the use of fixed plow unloading device should be used when the low speed. Exceeding the specified speed will affect the tape life.
5, the transport conveyor drum diameter and the relationship between the conveyor belt, roller drive roller to the matching and the requirements of the roller groove angle, should be based on the conveyor design requirements, a reasonable choice.
6, in order to reduce the impact of material on the tape and wear, feeding direction should be along the direction of operation of the tape; material falling to the tape on the drop should be reduced; feeding port should avoid the roller or roller directly above; The material should be shortened and the cushioning measures should be taken. To prevent scraper tape, the scraper scraper cleaning device and the discharge device and the contact part of the tape should be used with appropriate hardness of the rubber plate, do not use the cloth with a tape head.
7, Flat Transmission Belt in the use of the process should pay attention to the following matters:
A, to avoid the roller was covered by the material, resulting in rotation is not working, to prevent leakage card in the roller and tape between, pay attention to the activities of the part of the lubrication, but not oil conveyor belt.
B, and strive to avoid with load start.
C, tape occurred deviation, should take timely measures to correct.
D, found that local damage to the tape should be promptly repaired, so as not to expand.
E, to avoid the tape suffered a frame, pillars or block material block, to prevent the break tear.
 With the Flat Transmission Belt in the industrial production of the popular, multi-species, high-performance, lightweight, multi-functional, long life is the manufacturer concerned about several aspects. In industrial production, the correct use of Flat Transmission Belt is particularly important, the conveyor belt in use should pay attention to the following matters:
1, to avoid the roller is covered by the material, resulting in rotation is not working to prevent leakage card in the roller and tape between the attention of the conveyor belt part of the lubrication, but not oil conveyor belt.
2, to prevent the conveyor belt load start.
3, Flat Transmission Belt deviation, should take timely measures to correct.
4, found that the conveyor belt local damage, the application of artificial cotton timely repair, so as not to expand.
5, to avoid the conveyor belt suffered a rack, pillar or block material block, to prevent the break tear.