Home > Exhibition > Content

Causes of edge wear of conveyor belt

Nov 24, 2016

Conveyor belt edge wear mostly conveying belt deviation band edges and friction and wear of the rack. Conveyor belt should run on the centerline of the roller, but due to the conveyor of defects caused by manufacturing, installation, use, conveyors often deviate from the centerline deviation. Usually, conveying with in width direction Shang allows has 5% of run partial volume, dang run partial too much Shi, conveying with and supporting roll bracket, and machine frame contact and caused side rubber wear, serious run partial Shi, even will makes conveying with turned side, as drum of radial tour screws head, cleaning device block block, raised parts, or machine frame clearance had small, easy caused conveying with tear, cover rubber local stripping and designated injury.